Pant effectively improve the dimensional stability and the anticorrosion property of timbers. Without any chemicals, the process of coking which have no harm to human and environment can make the wood antique color. This equipment solve the relation between coking process parameters and the effect of carbonization by the control of the carbonization temperature and holding time. The process parameters of the equipment play a decisive role to the performance of the wood.

1.The ways to open the door: Open door manually, open the door by electricity, open the door by hydraulic. Advanced open door method ,only one young girl can open the door easily.
2.The sealing way: With the gas-filled silica gel seal ring, the air filled style sealing effect of the equipment is significantly better than others’. And the life of the equipment is more than one year.
3.Safety interlocking methods of the door of the tank: Automatic pressure safety interlocking method and Manual safety interlocking method, it solved the safety problem of wrong operation.
4.Vacuum control: After setting a vacuum table, vacuum reaches a predetermined value, close the valve to stop the vacuum.
5.Condenser: steam condensate systems, automatic water system.
6.Load: Two rail tank, using the 9th road rail. Good bearing, long life, safe and convenient.High temperature depth carbonized wood process:
Stage 1: raise and dry stage by high temperature , with high temperature steam to raise 100℃, at this time ,the moisture of the wood is closed to zero ,the drying time of high temperature is up to original moisture of wood ,and variety of trees ,and thickness of wood , if treated wood have high moisture ,it should be put into Kiln drying.

Stage 2: heat treatment stage ,the heat treatment is under low
oxygen airtight furnace ,according to treatment requirement , after high temperature dry ,when the temperature of furnace get 200 ℃ ,we can begin to treat, the time of heat treatment is up to original moisture of wood ,and variety of trees ,and thickness of wood

Stage 3: cool and moisture mediation treatment stage ,after heat treated wood become cool within controlled condition ,at this time use spray system to cool down the temperature ,then to process moisture mediation treatment .Pay more attention at this time ,after heat treatment wood is in high temperature stage , and have big temperature difference with outside .it will make wood crack ,this treated time is related to variety of trees and treated time.