The slag tapping machine is an important part of the chain grate coal-fired boiler, and its main function is to remove the burning ash and slag. What are the precautions for the installation of coal-fired boiler slagging machine?

First install the ash leakage interface to the lower part of the grate bottom plate, and then install the slag discharger, and use the secondary positioning and long method to connect. The interface must be lined with rubber asbestos board, and finally the car mount bracket and bearing base.

After installation, carefully check whether the motor steering, bearings, temperature, etc. meet the requirements, and check whether the equipment has abnormal conditions such as friction and vibration to ensure the normal use of the equipment. Then turn on the power, check whether the direction of rotation is correct, test for 2 hours in the cold state, there should be no abnormal sound, and let the water leak to check whether the flange interface is leaking.